ARO 100095-160 Pressure Gauge | 0-150 PSI, 1/8 in. NPT

ARO 100095-160 Pressure Gauge

The ARO 100095-160 is a compact general-purpose pressure gauge designed for compatible ARO air-preparation and pneumatic regulator applications. It features a 0-150 psi pressure range, 1-1/2 inch dial and 1/8 inch NPT male center-back connection.

This gauge provides a simple visual indication of regulated compressed-air pressure and can be used with compatible ARO Module/Air regulator systems and other suitable pneumatic equipment.

0-150 PSI Pressure Range

The 100095-160 measures pressure from 0 to 150 psi. This range is suitable for many industrial compressed-air systems where operators need a quick visual reference of downstream regulator pressure.

For best readability and gauge life, select a gauge range that keeps normal operating pressure away from the extreme ends of the scale whenever possible.

1-1/2 Inch Dial

The gauge uses a compact 1-1/2 inch nominal dial. Its small form factor makes it useful for regulator assemblies, air-preparation modules and installations where panel or piping space is limited.

1/8 Inch NPT Male Connection

The process connection is 1/8 inch NPT male with a center-back connection. Confirm thread size and connection orientation before installation.

The back-entry design allows the gauge face to remain easy to read when mounted directly into a compatible regulator or gauge port.

General-Purpose Pneumatic Gauge

Burt Process identifies the 100095-160 as a general-purpose pressure gauge for ARO regulator applications. Applied Industrial also lists it for Module/Air 1000 and Mini Series regulators.

This part is a pressure-indication accessory and should not be confused with a regulator, pressure switch or pressure transmitter.

Steel Case and Polycarbonate Lens

Published specifications list a steel case and polycarbonate lens. The internal pressure-sensing element uses a brass Bourdon tube and brass socket.

The gauge is intended for compatible compressed-air and general pneumatic service within its published temperature and pressure limits.

Pressure Gauge Accuracy

Published distributor specifications list an accuracy of approximately ±3%. This makes the gauge suitable for general pressure indication and regulator monitoring rather than high-precision calibration work.

Compatible ARO Air-Preparation Applications

Published compatibility information identifies this gauge for ARO Module/Air and regulator applications, including:

• ARO 1000 Series
• ARO Mini Series
• Compatible regulator assemblies with 1/8 inch gauge ports

Some distributor data also lists broader compatibility with selected 1500, 2000 and 3000 Series applications. Always verify the exact regulator or air-preparation model before installation.

Installation Considerations

Before installing the gauge:

• Verify the 1/8 inch NPT gauge port
• Confirm the required 0-150 psi pressure range
• Depressurize the pneumatic system
• Use an appropriate thread-sealing method
• Avoid over-tightening the gauge connection

Ordering ARO 100095-160

Order using the complete manufacturer part number ARO 100095-160. Confirm dial size, pressure range, connection size and mounting orientation before purchasing.

Using the exact part number helps avoid selecting another ARO gauge with a different pressure range or connection configuration.