ARO 104096 Panel Mounting Nut for 1/8 in. and 1/4 in. Air Valves
Mount compatible ARO 104104 check, flow-control and needle valves securely with the 104096 panel nut for 1/8 in. and 1/4 in. models.
ARO 104096 Panel Mounting Nut
The ARO 104096 Panel Mounting Nut is a mounting accessory designed for compatible ARO pneumatic valves. It provides the retaining hardware needed when installing supported valves through a control panel, machine enclosure, bracket or similar mounting surface.
ARO documentation identifies 104096 as the panel nut for the smaller 1/8-inch and 1/4-inch versions of the 104104 valve family.
Compatible with ARO 104104 Valve Configurations
The 104104 family includes:
- C Series — Check Valves
- F Series — Flow-Control Valves
- N Series — Needle Valves
ARO lists the 104096 panel mounting nut for the 01 and 02 port-size configurations, corresponding to 1/8-27 NPTF and 1/4-18 NPTF models.
Documented compatible examples include 104104-C01-G, 104104-C02-G, 104104-F01-G, 104104-F02-G, 104104-N01-G and 104104-N02-G.
Built for Remote Panel Installation
ARO's 104104 pneumatic valves are threaded to support remote panel mounting. The 104096 nut secures the valve to the mounting panel, helping keep the control accessible while supporting a clean and organized pneumatic installation.
This can be useful for machinery where the operator needs convenient access to a flow-control or needle-valve adjustment while the pneumatic tubing and main equipment remain behind the panel.
Select the Correct Panel Nut by Valve Size
ARO specifies two different panel mounting nuts within this valve family:
104096 — for 1/8-inch and 1/4-inch valve models
104094 — for 3/8-inch, 1/2-inch and 3/4-inch valve models.
Because of this distinction, do not select the mounting nut solely by appearance. Confirm your complete valve model and port size before ordering.
Replacement and Installation Planning
Use ARO part number 104096 when replacing a missing, damaged or previously removed panel mounting nut on a compatible valve.
Before ordering, verify:
- ARO valve model number
- 1/8-inch or 1/4-inch valve size
- Panel-mount installation requirement
- Number of valves requiring mounting hardware
The 104096 is the mounting nut only; it should not be described as a complete check valve, flow-control valve or needle valve. Burt Process also categorizes it specifically as an ARO Panel Nut / Part or Accessory.
