ARO 95940-1 Cast Iron Inlet Manifold
Cast iron inlet manifold for ARO metallic diaphragm pumps, one per pump, used in PD15A, PD15S and PD15R.
ARO 95940-1 is a cast iron inlet manifold for metallic diaphragm pumps. It is listed in 11 ARO pump models, including PD15A and PD15R units.
The ARO 95940-1 is the inlet manifold for ARO (Ingersoll Rand) metallic diaphragm pumps. On a double diaphragm pump, the inlet manifold carries product from the suction connection and splits it between the two fluid chambers, passing through the inlet check valves on the way.
This manifold is cast iron, and the parts data calls for one per pump. Consider a new one when the casting is cracked, the seat or gasket faces are pitted, or the suction port threads will no longer hold a fitting. Check the model code on your pump nameplate against the list below before you order.
Used In These ARO Pumps
- ARO PD15A-ACP-ETT
- ARO PD15A-ACP-GGG
- ARO PD15A-ACP-STT
- ARO PD15A-ACP-SGG
- ARO PD15A-ACS-AAA
- ARO PD15S-ACS-AAA
- ARO PD15R-ACS-AAA
- ARO PD15A-ACP-HAA
Three more ARO pump models also use the 95940-1.
| Part No | 95940-1 |
|---|---|
| Name | Inlet Manifold |
| Material | Cast Iron |
| Application | metallic Diaphragm Pump |
| Typical Assembly Quantity | 1 |
| Brand | ARO |
| Product Type | Part |
