ARO 96200-2 PVDF Inlet Manifold
PVDF inlet manifold for ARO PD10P-AKS-KTT and PD10P-AKS-KAA double diaphragm pumps
ARO 96200-2 is a PVDF inlet manifold for ARO diaphragm pumps. It is used on the PD10P-AKS-KTT and PD10P-AKS-KAA double diaphragm models.
The ARO 96200-2 is the inlet manifold for two PD10P double diaphragm pumps. On an air-operated diaphragm pump, the inlet manifold is the wetted housing on the suction side. It takes fluid from the inlet port and routes it to the two inlet check valves, one for each diaphragm chamber.
This manifold is made from PVDF, a fluoropolymer often chosen for wetted parts that handle corrosive fluids. Because the manifold touches the pumped fluid, its material should match the rest of the pump's fluid section. The two pumps below share the PD10P-AKS prefix and differ only in the last three characters, so check the full code on your nameplate.
Used In These ARO Pumps
| Part No | 96200-2 |
|---|---|
| Name | ARO Inlet Manifold |
| Material | PVDF |
| Application | Diaphragm Pumps |
| Brand | ARO |
| Product Type | Part |
