ARO 637541-2-F Stainless Solenoid Valve Block Kit, NEC/CEC, 1" Pumps
Stainless steel 24 VDC NEC/CEC solenoid valve block kit for converting 1" ARO Compact or EXP pumps to PE.
This stainless steel valve block kit carries a 24 VDC NEC/CEC coil and lets you convert a 1" ARO Compact or EXP unit from PD operation to PE.
The ARO 637541-2-F pairs a stainless steel solenoid valve block with a coil listed as 24 VDC NEC/CEC. It is intended for the 1" size of the Compact and EXP series, and the notes field describes a 1" PD to PE conversion.
NEC and CEC are the North American electrical codes, so this is the variant to look at when your coil requirement is written around those codes. The solenoid block itself lets a 24 VDC signal decide when air reaches the pump's air section.
Where It Fits In
- Your electrical spec for the pump calls for an NEC/CEC listed coil.
- A 1" PD unit is being upgraded so a controller can run it.
- Stainless steel is your preferred material for the valve block.
Verifying Compatibility
Pump fit data is not available for this kit. Find the model number and serial number on the pump's nameplate and check them in the ARO parts list for your unit. Two ARO documents are tied to this item: Electronic Interface Accessories, and Process Ready Pumps.
| Brand | ARO |
|---|---|
| Product Type | Kit |
| Voltage | 24 VDC NEC/CEC |
| For Use With | 1" Compact and EXP series ARO pumps |
| Materials of Construction | Stainless Steel |
| Notes | 1" Conversion Kit For Pd To Pe |
| Electronic Accessory Kit | Yes |
