ARO 637542-1-H Aluminum Solenoid Valve Block Kit, ATEX, 1-1/2" Pumps
Aluminum valve block kit for 1-1/2" Compact and EXP series ARO pumps; coil rated 24 VDC ATEX/IECex.
Convert a 1-1/2" Compact or EXP series ARO pump from PD to PE with the 637542-1-H, an aluminum valve block kit using an ATEX/IECex 24 VDC coil.
Sized for 1-1/2" Compact and EXP series ARO pumps, the 637542-1-H is an aluminum solenoid valve block kit. ARO lists it as the 1-1/2" conversion kit from PD to PE. The coil is rated 24 VDC ATEX/IECex.
On an air-operated pump, a solenoid valve block acts as the electrical gate for the air motor. With the coil energized, air is directed to cycle the pump. Without the signal, the pump stays idle until the controller calls for it.
Is This the Kit You Need?
- You have a 1-1/2" PD pump and want to move it to the PE configuration.
- Coils in your area must be ATEX/IECex marked.
- An aluminum block matches what you run on the rest of the pump.
Before Ordering
No list of fitted pumps comes with this kit in our data. Check your pump's nameplate for the model and serial, then match those against the ARO parts list. Reference material named on the listing: Process Ready Pumps and Electronic Interface Accessories.
| Brand | ARO |
|---|---|
| Product Type | Kit |
| Voltage | 24 VDC ATEX/IECex |
| For Use With | 1-1/2" Compact and EXP series ARO pumps |
| Materials of Construction | Aluminum |
| Notes | 1-1/2" Conversion Kit For Pd To Pe |
| Electronic Accessory Kit | Yes |
