ARO 637542-1-N Solenoid Valve Block Kit for 1-1/2 in. Pumps
Aluminum solenoid valve block, no coil, for converting 1-1/2-inch Compact and EXP series pumps from PD to PE.
ARO 637542-1-N is an aluminum solenoid valve block kit, listed as No Coil, for PD to PE conversion of 1-1/2-inch Compact and EXP series pumps.
The ARO 637542-1-N is the 1-1/2-inch member of ARO's solenoid valve block conversion kits. ARO lists it for 1-1/2-inch Compact and EXP series pumps and notes that it converts a PD model to PE. The valve block is made of aluminum.
The voltage field for this kit reads No Coil, meaning it comes without a solenoid coil. Plan to pair it with a coil that matches the voltage your controls provide. Once fitted, the solenoid takes over shifting the pump's air valve, so each stroke follows an electrical signal.
When to Use This Kit
- A 1-1/2-inch Compact or EXP pump needs to be stroked by a PLC or batch controller.
- You already have a coil, or prefer to choose the coil voltage separately.
- You want one spare block that can serve sites running different control voltages.
Confirming Fit
Our data has no individual pump list for the 637542-1-N. Take the model and serial number from the pump nameplate and check them against both ARO documents for this kit: Electronic Interface Accessories, and Process Ready Pumps.
| Brand | ARO |
|---|---|
| Product Type | Kit |
| Voltage | No Coil |
| For Use With | 1-1/2" Compact and EXP series ARO pumps |
| Materials of Construction | Aluminum |
| Notes | 1-1/2" Conversion Kit For Pd To Pe |
| Electronic Accessory Kit | Yes |
