ARO 637542-2-D Solenoid Valve Block Kit, 1-1/2" Stainless Steel
Stainless steel PD-to-PE valve block for 1-1/2" Compact and EXP ARO pumps, fitted with a 24 VDC coil.
A stainless steel solenoid valve block that switches a 1-1/2" ARO Compact or EXP pump from PD to PE control. Coil voltage is listed as 24 VDC.
Built for the 1-1/2" size, the ARO 637542-2-D pairs a stainless steel valve block with a plain 24 VDC solenoid. ARO lists it for Compact and EXP series pumps of that port size, as the kit for changing a PD pump into a PE pump.
In practice, the solenoid hands stroke timing to an outside controller. Energizing and de-energizing the coil routes air to drive each cycle, so your control logic decides when the pump moves. The spec sheet gives the coil as 24 VDC with no hazardous-area marking noted.
When This Kit Fits the Job
- A 1-1/2" pump must run on demand from a PLC or batching controller.
- You need pump cycles timed by a 24 VDC output from your control panel.
- Stainless steel is the material you want for the block on this pump.
Fit data is not linked for this part number. Check the model code and serial on the pump nameplate, then confirm the 1-1/2" kit in ARO electronic interface literature before you order.
| Brand | ARO |
|---|---|
| Product Type | Kit |
| Voltage | 24 VDC |
| For Use With | 1-1/2" Compact and EXP series ARO pumps |
| Materials of Construction | Stainless Steel |
| Notes | 1-1/2" Conversion Kit For Pd To Pe |
| Electronic Accessory Kit | Yes |
