ARO 637542-2-H Stainless Steel Solenoid Valve Block Kit, 1-1/2"
1-1/2" EXP/Compact pump conversion kit with stainless steel solenoid valve block, 24 VDC ATEX/IECEx
Stainless steel sets ARO 637542-2-H apart. This 1-1/2" PD to PE conversion kit carries a voltage rating of 24 VDC ATEX/IECEx.
Stainless steel sets 637542-2-H apart from the other 1-1/2" blocks. This ARO solenoid valve block kit converts 1-1/2" Compact and EXP series pumps from PD to PE, and its voltage is listed as 24 VDC ATEX/IECEx. That ATEX/IECEx entry is the detail to compare against your area classification.
In operation, the solenoid receives a control signal and moves the air valve inside the pump. Your PLC or timer then decides how often the pump strokes and when it stops. Look for this kit in ARO's Process Ready Pumps material and its Electronic Interface Accessories sheet.
Where It Fits Best
- Your build calls for a stainless steel block rather than plastic or aluminum.
- The area requires an ATEX/IECEx-listed coil at 24 VDC.
- You want remote start, stop and speed control on a 1-1/2" unit.
Use the model and serial stamped on the pump nameplate to verify fit before ordering. The kit is listed only for 1-1/2" Compact and EXP pumps.
| Brand | ARO |
|---|---|
| Product Type | Kit |
| Voltage | 24 VDC ATEX/IECex |
| For Use With | 1-1/2" Compact and EXP series ARO pumps |
| Materials of Construction | Stainless Steel |
| Notes | 1-1/2" Conversion Kit For Pd To Pe |
| Electronic Accessory Kit | Yes |
