ARO 96478-1 ARO (R 1/2 [1/2 - 14 BSP taper]) | Replacement Pump Part

ARO 96478-1 ARO (R 1/2 [1/2 - 14 BSP taper])

The ARO 96478-1 ARO (R 1/2 [1/2 - 14 BSP taper]) is a replacement service component intended for Non-metallic Pumps. It is suited to maintenance, repair and overhaul work where the existing component is worn, damaged, missing or being replaced as part of a planned service procedure.

For purchasing and maintenance teams, the manufacturer part number 96478-1 should be the primary identifier. ARO equipment can use visually similar parts across different models, sizes and generations, so the complete pump or equipment model should be checked against the applicable parts list before installation.

Product Identification and Application

This listing identifies the component as ARO (R 1/2 [1/2 - 14 BSP taper]). The available application information associates it with Non-metallic Pumps. Use that application as a selection guide, but verify the exact model and parts-list position whenever the repair involves a model-specific assembly.

The available product data identifies the component material as Polypropylene. Use this material designation when comparing the replacement with the existing assembly and any chemical, temperature or corrosion requirements.

• Part number: 96478-1
• Component: ARO (R 1/2 [1/2 - 14 BSP taper])
• Material: Polypropylene
• Application: Non-metallic Pumps
• Part number: 96478-1
• Brand: ARO

Maintenance and Replacement Guidance

Before removing the original part, isolate the equipment and follow the shutdown, depressurization, lockout and service instructions for the specific ARO model. During disassembly, note the orientation of the existing component and inspect the mating surfaces, fasteners, seals and nearby parts that may affect the repair.

Check the removed aro (r 1/2 [1/2 - 14 bsp taper]) for wear, cracking, distortion, corrosion, thread damage, surface scoring, leakage marks or other signs of deterioration that are relevant to its function. If neighboring parts show similar wear, replacing a single component may not fully correct the underlying service condition.

The required assembly quantity is not clearly stated in the available row. Confirm the parts-list quantity for the exact equipment model before placing a maintenance order.

Why Model Verification Matters

ARO product families can share similar component names while using different materials, dimensions, threads, hardware sizes or assembly configurations. Selecting by appearance alone can lead to an incorrect order. Match 96478-1 to the complete equipment model, current parts diagram and service section whenever possible.

For an accurate maintenance order, confirm the part number, full model, material when specified, required quantity, service location and whether the repair is being completed with an individual part or a larger service kit. This helps reduce duplicate purchases, installation delays and avoidable downtime.

Ordering ARO 96478-1

When requesting a quote or placing an order, provide ARO 96478-1 together with the complete pump or equipment model. If the machine has been rebuilt or modified, compare the existing assembly with the current parts documentation before purchase.

The goal is to match the documented replacement component to the actual service configuration. Using the exact part number and verified equipment information gives technicians and buyers a clearer, more reliable path to selecting the correct aro (r 1/2 [1/2 - 14 bsp taper]) for the repair.