ARO PD10A-AAP-GGG Double Diaphragm Pump
The ARO PD10A-AAP-GGG is a 1-inch Metallic EXP Air-Operated Double Diaphragm (AODD) Pump engineered for efficient, leak-free fluid transfer in demanding industrial environments. Featuring a durable aluminum center body and fluid section with Nitrile (Buna-N) diaphragms, balls, and seats, it delivers flow rates up to 52.2 GPM (197.6 LPM) while providing excellent performance for oils, fuels, petroleum-based products, chemicals, and general industrial fluids. Designed with ARO's advanced EXP air motor technology, it offers superior energy efficiency, reliable no-stall operation, and low maintenance.
ARO PD10A-AAP-GGG Double Diaphragm Pump is a 1-inch metallic air-operated double diaphragm pump in the ARO PX10X-XXX-XXX EXP family. This configured model is identified by SKU PD10A-AAP-GGG and uses an 1 in NPTF fluid connection.
PX10X-XXX-XXX Series Overview
The PX10X family is designed for transfer, filling, recirculation, and batching duties in industrial, chemical, petrochemical, and ceramic processes. The series combines 1-inch metallic fluid sections with multiple material and porting options for application-specific selection.
- Performance: up to 52.2 gpm (197.6 lpm) at a maximum operating pressure of 120 psi (8.3 bar).
- Displacement: 0.232 gal (0.88 L) per cycle with a 1:1 pressure ratio.
- Fluid handling: accepts suspended solids up to 1/8 in (3.3 mm) and provides a maximum dry suction lift of 19 ft (5.7 m).
- Series porting: 1-11-1/2 NPTF or Rp1 (1-11 BSP), with side- or center-port configurations available across the family.
Series Design Benefits
- The Simul-Shift valve supports a positive, repeatable shift signal.
- ARO's unbalanced air-valve design is engineered for stall-resistant operation.
- Bolted, modular construction supports leak control and easier service access.
- Multiple casing, diaphragm, ball, and seat materials support fluid-compatibility selection.
PD10A-AAP-GGG Configuration
This SKU is configured with diaphragms: Nitrile, balls: Nitrile, seats: Hytrel, hardware: Plated Steel. Use these configured materials, rather than the full series material range, when checking chemical and temperature compatibility.
Series ratings describe family-level capability. Confirm the selected model's materials, port arrangement, air supply, fluid compatibility, and operating temperature against the application before ordering.
| Brand | ARO |
|---|---|
| Product Type | Pump |
| Product Series | EXP Series |
| Material - Diaphragm | Nitrile |
| Application | Air Operated Pump |
| Inlet/Outlet Connection Type | NPTF |
| Outlet Size | 1 in |
| Solids Handling | 1/8 in |
| Material - Balls | Nitrile |
| Material - Seats | Hytrel |
| Max Air Inlet Pressure | 120 psi (8.3 bar) |
| Max Flow | 52.2 gpm (197.6 lpm) |
| Max Fluid Pressure | 120 psi (8.3 bar) |
| Max Temperature | 350°F (176.7°C) |
| Noise Level | 80.6 dB(A) |
| Material - Hardware | Plated Steel |
| Displacement | Positive Displacement |
The ARO 95845 is a Santoprene check-valve diaphragm for the air section of compatible ARO PM15X diaphragm pumps. Verify the complete pump model before ordering.
