ARO PD10P-APS-PVV 1-Inch NPTF Diaphragm Pump, Viton
1" EXP polypropylene diaphragm pump with NPTF threads, Viton diaphragms and balls, and PP seats.
NPTF-threaded 1" ARO EXP pump in polypropylene, fitted with Viton diaphragms, Viton balls and PP seats for US pipe connections.
With 1" NPTF threaded connections, the PD10P-APS-PVV screws straight into standard US tapered pipe. It is an ARO EXP Series non-metallic pump whose wetted parts and seats are polypropylene, while the diaphragms and balls are Viton. The center section is PP and the hardware is stainless steel.
Given an air supply of up to 120 psi (8.3 bar), it can move 53.0 gpm (200.6 lpm). Fluid pressure tops out at 120 psi (8.3 bar), and the checks pass solids of 1/8 in.
This is the threaded counterpart to the flanged PD10P-FPS-PVV: the listed housing, seat and elastomer materials match, and the end connections differ. Pick it when your line uses 1" NPT fittings or hose with threaded ends. The operators manual covers air supply and installation.
Key Specifications
- Port thread: 1" NPTF
- Fluid path and seats: polypropylene
- Viton diaphragms and Viton balls
- Maximum output: 53.0 gpm (200.6 lpm)
- Rated noise: 79.7 dB(A)
- Hardware: stainless steel
Viton is a fluoroelastomer, so check its compatibility, and that of polypropylene, with your fluid in the Chemical Resistance Guide before ordering.
Common Uses
- Threaded chemical transfer lines built to NPT standards
- Fluids compatible with both polypropylene and Viton
- Portable or skid setups where threaded hose fittings are easier than flanges
- Low-solids process and utility liquids
Service Parts for This Pump
Common replacement items for the PD10P-APS-PVV:
- ARO 637396-VV kit for pump repair
- ARO 96293 spool
- ARO 96105-1 polypropylene-model fluid cap
- ARO Y186-49 U-cup
- ARO 95842 gasket
- ARO 66073-2 airline kit
Fifty-eight parts and kits make up the full list.
| Brand | ARO |
|---|---|
| Product Type | Pump |
| Product Series | EXP Series |
| Material - Diaphragm | Viton |
| Application | Air Operated Pump |
| Outlet Size | 1 in |
| Solids Handling | 1/8 in |
| Material - Balls | Viton |
| Material - Seats | Polypropylene |
| Max Air Inlet Pressure | 120 psi (8.3 bar) |
| Max Flow | 53.0 gpm (200.6 lpm) |
| Max Fluid Pressure | 120 psi (8.3 bar) |
| Noise Level | 79.7 dB(A) |
| Material - Hardware | Stainless Steel |
| Notes | AODD Pump, Non-Metallic, Expert Series, 1" NPTF Thread Connections, PP Center Section, PP Wetted Parts, SS Hardware, PP Seat, Viton Ball, Viton Diaphragm |
| Displacement | Positive Displacement |
ARO 96229 Flange Nut is an ARO part or accessory, identified by SKU 96229. Review specifications and model compatibility before ordering.
Replace or service compatible ARO Expert Series diaphragm pump assemblies with the 96229 M8 x 1.25 stainless steel flange nut.
The ARO 95845 is a Santoprene check-valve diaphragm for the air section of compatible ARO PM15X diaphragm pumps. Verify the complete pump model before ordering.
