ARO PD10P-BPS-PGG 1-Inch BSP Diaphragm Pump, Nitrile
Non-metallic 1" EXP pump with BSP threaded ports, Nitrile diaphragms and balls, and polypropylene seats.
BSP-threaded 1-inch EXP diaphragm pump from ARO with Nitrile diaphragms and balls on polypropylene seats and stainless hardware.
Nitrile (Buna) is the elastomer in the PD10P-BPS-PGG: both the diaphragms and the check balls use it, and they close against polypropylene seats. This non-metallic 1" Expert Series pump from ARO (Ingersoll Rand) has BSP threaded inlet and outlet connections, which suits piping built to British Standard Pipe threads. Fasteners are stainless steel.
Supply it with up to 120 psi (8.3 bar) of air and it can deliver 53.0 gpm (200.6 lpm). Fluid pressure is limited to the same 120 psi (8.3 bar), and particles up to 1/8 in will pass.
Key Specifications for PD10P-BPS-PGG
- Thread type: BSP, 1" outlet
- Diaphragm and ball elastomer: Nitrile
- Seat material: polypropylene
- Rated flow: 53.0 gpm (200.6 lpm)
- Noise at rated conditions: 79.7 dB(A)
Typical Applications
- Oil-based fluids and other liquids where Nitrile is a common elastomer choice
- Piping systems laid out with BSP pipe threads
- General transfer of thin fluids with small suspended solids
- Any duty cleared for Nitrile and polypropylene in the Chemical Resistance Guide
Replacement Parts and Kits
Parts and kits drawn from this pump's parts list:
- ARO 637396-GG EXP service kit (GG)
- ARO 96105-1 fluid-side cap
- ARO 96104-1 cap for the air side
- ARO 96293 spool for the air valve
- ARO Y186-49 U cup
- ARO 67237 diaphragm failure detection kit
There are 58 entries on the full list for this model.
Choose this GG build over the Viton or PTFE versions when your fluid is compatible with Nitrile and the line is threaded BSP. Its 637396-GG kit carries the same GG code, which keeps reordering simple. The parts list document shows part positions and the remaining items.
| Brand | ARO |
|---|---|
| Product Type | Pump |
| Product Series | EXP Series |
| Material - Diaphragm | Nitrile |
| Application | Air Operated Pump |
| Inlet/Outlet Connection Type | BSP |
| Outlet Size | 1 in |
| Solids Handling | 1/8 in |
| Material - Balls | Nitrile |
| Material - Seats | Polypropylene |
| Max Air Inlet Pressure | 120 psi (8.3 bar) |
| Max Flow | 53.0 gpm (200.6 lpm) |
| Max Fluid Pressure | 120 psi (8.3 bar) |
| Noise Level | 79.7 dB(A) |
| Material - Hardware | Stainless Steel |
| Notes | 1" Exp Non Metallic Diaphragm Pump |
| Displacement | Positive Displacement |
ARO 96229 Flange Nut is an ARO part or accessory, identified by SKU 96229. Review specifications and model compatibility before ordering.
Replace or service compatible ARO Expert Series diaphragm pump assemblies with the 96229 M8 x 1.25 stainless steel flange nut.
The ARO 95845 is a Santoprene check-valve diaphragm for the air section of compatible ARO PM15X diaphragm pumps. Verify the complete pump model before ordering.
