ARO PD10P-BPS-PVV 1 In BSP Diaphragm Pump, Viton/PP Seats
Non-metallic 1 in EXP AODD pump with BSP connections, Viton diaphragms and balls, polypropylene seats.
BSP-connected 1 in EXP diaphragm pump using Viton diaphragms and balls with polypropylene seats. Rated flow is 53.0 gpm (200.6 lpm).
The ARO PD10P-BPS-PVV combines BSP connections with a Viton fluid end. Both diaphragms and balls are Viton, and they work against polypropylene seats. It is a 1 in non-metallic EXP Series pump assembled with stainless steel hardware.
Flow reaches 53.0 gpm (200.6 lpm). Maximum air inlet pressure is 120 psi (8.3 bar), which is also the fluid pressure limit. The valves pass solids up to 1/8 in.
Viton is a fluoroelastomer used where standard rubbers may not hold up to the fluid. On the PVV it forms both moving elastomer parts, while the seats stay polypropylene. If your piping is NPT rather than BSP, choose a version with NPTF ports instead, since the two thread forms do not interchange. Each option is decoded in the model number code document.
Quick Specs
- Connection type: BSP
- Outlet: 1 in
- Diaphragms and balls: Viton
- Seats: polypropylene
- Noise: 79.7 dB(A)
Where the PVV Works Well
- Plants with BSP-threaded pipe and fittings
- Fluids for which Viton is listed as compatible
- Chemical transfer where a plastic seat is acceptable
- Mobile pumping carts powered by shop air
- Sumps and transfer tanks with particles no larger than 1/8 in
Check compatibility in the Chemical Resistance Guide supplied with this pump.
Kits and Spares
Parts below are taken from the PVV parts list.
- ARO 637396-VV repair kit
- ARO 67237 kit for detecting diaphragm failure
- ARO Y240-9 packing
- ARO 96293 air valve spool
- ARO 96105-1 fluid cap
- ARO 95879 hex flange nut
Overall, 58 parts are listed for the BPS-PVV. Compare the nameplate model code with this listing first, so the kit you pick suits this pump.
| Brand | ARO |
|---|---|
| Product Type | Pump |
| Product Series | EXP Series |
| Material - Diaphragm | Viton |
| Application | Air Operated Pump |
| Inlet/Outlet Connection Type | BSP |
| Outlet Size | 1 in |
| Solids Handling | 1/8 in |
| Material - Balls | Viton |
| Material - Seats | Polypropylene |
| Max Air Inlet Pressure | 120 psi (8.3 bar) |
| Max Flow | 53.0 gpm (200.6 lpm) |
| Max Fluid Pressure | 120 psi (8.3 bar) |
| Noise Level | 79.7 dB(A) |
| Material - Hardware | Stainless Steel |
| Notes | 1" Exp Non Metallic Diaphragm Pump |
| Displacement | Positive Displacement |
ARO 96229 Flange Nut is an ARO part or accessory, identified by SKU 96229. Review specifications and model compatibility before ordering.
Replace or service compatible ARO Expert Series diaphragm pump assemblies with the 96229 M8 x 1.25 stainless steel flange nut.
The ARO 95845 is a Santoprene check-valve diaphragm for the air section of compatible ARO PM15X diaphragm pumps. Verify the complete pump model before ordering.
