ARO PD10P-FKS-KTT 1-Inch Diaphragm Pump, PVDF Seats, PTFE Balls
EXP Series 1" pump with PTFE/Santoprene diaphragms, Teflon balls, PVDF seats and stainless steel hardware.
ARO PD10P-FKS-KTT: a 1" EXP Series AODD pump with PTFE/Santoprene diaphragms, Teflon/PTFE balls and PVDF seats, max 120 psi.
PTFE/Santoprene diaphragms, Teflon/PTFE balls and PVDF seats make up the fluid-contact elastomer and valve package of the PD10P-FKS-KTT. It is a 1" ARO (Ingersoll Rand) Expert Series air-operated double diaphragm pump with stainless steel hardware.
Rated values from the spec table: 53.0 gpm (200.6 lpm) of flow, a 120 psi (8.3 bar) cap on each of air inlet and fluid pressure, solids handling of 1/8 in and a sound level of 79.7 dB(A). Our data does not state the port style or housing material for this model, so confirm them with the model number code chart or nameplate.
Note that the PD10P-YKS-KTT carries identical listed materials and ratings. The two models differ in the first group of letters, so match the full code on your nameplate when replacing a pump.
At a Glance: Key Specifications
- 1 in outlet
- PTFE/Santoprene diaphragm
- Teflon/PTFE balls on PVDF seats
- Flow: 53.0 gpm (200.6 lpm)
- Max fluid pressure: 120 psi (8.3 bar)
Typical Applications
- Corrosive liquids where PTFE contact surfaces are preferred
- Duties that need PVDF valve seats
- Batch or continuous transfer of low-solids fluids
Parts to Keep in Stock
Six parts or kits from the PD10P-FKS-KTT list:
- ARO 637396-TT EXP kit
- ARO 67237 diaphragm failure detection (DFD)
- ARO 96104-1 air-side cap
- ARO 96105-2 fluid-side cap
- ARO Y240-9 black U-cup
- ARO 95844 gasket
This pump has 58 listed parts and kits. Its documents also include a Chemical Resistance Guide, the right place to check a fluid against PTFE and PVDF before ordering, plus an operators manual for installation and startup.
| Brand | ARO |
|---|---|
| Product Type | Pump |
| Product Series | EXP Series |
| Material - Diaphragm | PTFE/Santoprene |
| Application | Air Operated Pump |
| Outlet Size | 1 in |
| Solids Handling | 1/8 in |
| Material - Balls | Teflon/PTFE |
| Material - Seats | PVDF |
| Max Air Inlet Pressure | 120 psi (8.3 bar) |
| Max Flow | 53.0 gpm (200.6 lpm) |
| Max Fluid Pressure | 120 psi (8.3 bar) |
| Noise Level | 79.7 dB(A) |
| Material - Hardware | Stainless Steel |
| Displacement | Positive Displacement |
ARO 96229 Flange Nut is an ARO part or accessory, identified by SKU 96229. Review specifications and model compatibility before ordering.
Replace or service compatible ARO Expert Series diaphragm pump assemblies with the 96229 M8 x 1.25 stainless steel flange nut.
The ARO 95845 is a Santoprene check-valve diaphragm for the air section of compatible ARO PM15X diaphragm pumps. Verify the complete pump model before ordering.
