ARO PD10P-FKS-KVV 1-Inch PVDF Diaphragm Pump, Viton, Flanged
Flanged 1" PVDF air-operated diaphragm pump, EXP Series, with Viton diaphragms, Viton balls and PVDF seats.
A 1-inch EXP Series PVDF diaphragm pump fitted with Viton diaphragms and balls, PVDF seats and ANSI/DIN hybrid side flanges.
The ARO PD10P-FKS-KVV is a 1-inch Expert (EXP) Series air-operated double diaphragm pump built around a PVDF fluid path. It pairs Viton diaphragms and Viton balls with PVDF seats, and it connects through 1" ANSI/DIN hybrid side flanges instead of threaded ports. A polypropylene center section houses the air side, and stainless steel hardware clamps the body together.
Peak output is 53.0 gpm (200.6 lpm). Both air supply and discharge pressure are capped at 120 psi (8.3 bar), with a published noise level of 79.7 dB(A).
The letters in the model code describe the build, and the Model number code document decodes each position. For this unit, the flanged ends make it a direct choice where the existing line has mating ANSI or DIN flanges, and the all-PVDF wetted section keeps polypropylene out of contact with the pumped fluid.
Key Specifications
- Ports: 1" ANSI/DIN hybrid side flange
- Wetted body and seats: PVDF
- Diaphragm and check balls: Viton
- Flow ceiling: 53.0 gpm (200.6 lpm)
- Air inlet and fluid pressure limit: 120 psi (8.3 bar)
- Passes particles to 1/8 in; rated noise 79.7 dB(A)
Typical Applications
- Moving aggressive chemicals where a fluoropolymer housing is preferred over polypropylene
- Process lines already piped with ANSI or DIN flanges
- Fluids that call for a fluoroelastomer diaphragm, after checking the Chemical Resistance Guide
- Clean or lightly loaded liquids carrying only fine particles
Service Parts for This Pump
Here are six items taken from the PD10P-FKS-KVV parts list, starting with the repair kit:
- ARO 637396-VV pump repair kit
- ARO 67237 add-on for spotting a diaphragm rupture
- ARO 96105-2 fluid cap
- ARO 96293 spool, the moving element of the air valve that alternates air between chambers
- ARO 95844 gasket
- ARO Y240-9 black U-cup packing
In all, 58 parts and kits are listed for this model, so use the part list document to locate anything not shown here.
| Brand | ARO |
|---|---|
| Product Type | Pump |
| Product Series | EXP Series |
| Material - Diaphragm | Viton |
| Application | Air Operated Pump |
| Outlet Size | 1 in |
| Solids Handling | 1/8 in |
| Material - Balls | Viton |
| Material - Seats | PVDF |
| Max Air Inlet Pressure | 120 psi (8.3 bar) |
| Max Flow | 53.0 gpm (200.6 lpm) |
| Max Fluid Pressure | 120 psi (8.3 bar) |
| Noise Level | 79.7 dB(A) |
| Material - Hardware | Stainless Steel |
| Notes | AODD Pump, Non-Metallic, Expert Series, 1" ANSI/DIN Hybrid Side Flange Connections, PP Center Section, Conductive PVDF Wetted Parts, SS Hardware, PVDF Seat, Viton Ball, Viton Diaphragm |
| Displacement | Positive Displacement |
ARO 96229 Flange Nut is an ARO part or accessory, identified by SKU 96229. Review specifications and model compatibility before ordering.
Replace or service compatible ARO Expert Series diaphragm pump assemblies with the 96229 M8 x 1.25 stainless steel flange nut.
The ARO 95845 is a Santoprene check-valve diaphragm for the air section of compatible ARO PM15X diaphragm pumps. Verify the complete pump model before ordering.
