ARO PD10P-FPS-PVV 1-Inch Polypropylene Diaphragm Pump, Viton
All-polypropylene wetted 1" EXP pump; Viton membranes and checks, PP seats, flanged ANSI/DIN hybrid ends.
Polypropylene-bodied 1-inch EXP diaphragm pump with Viton diaphragms and balls, PP seats and flanged connections for plant piping.
For flanged systems that need a Viton elastomer but not a fluoropolymer housing, the PD10P-FPS-PVV uses polypropylene for the wetted housing and the seats. The diaphragms and balls are Viton. This 1-inch ARO EXP model bolts up to 1" ANSI/DIN hybrid side flanges and has a PP center section with stainless steel hardware.
It is rated for 53.0 gpm (200.6 lpm) of flow and 120 psi (8.3 bar) on both the air and fluid side.
Compared with the PVDF flanged PD10P-FKS-KVV, this model keeps the same Viton elastomers and flange style but moves the housing and seats to polypropylene. Installation, air supply and startup steps are covered in the operators manual and general information manual supplied with this pump's documents.
Specifications That Matter
- Wetted material: polypropylene, with PP seats
- Elastomer: Viton diaphragm and Viton ball checks
- End connections: 1" ANSI/DIN hybrid side flange
- Capacity: 53.0 gpm (200.6 lpm) maximum
- Pressure rating, air in and fluid out: 120 psi (8.3 bar)
- Largest solid passed: 1/8 in
Typical Applications
- Transferring chemicals that polypropylene and Viton both tolerate, per the Chemical Resistance Guide
- Flanged chemical feed or unloading stations
- Sites that standardize on ARO EXP pumps and want a polypropylene flanged option
- Batch transfer of thin process liquids
Spare Parts and Kits
Keep these PD10P-FPS-PVV parts on hand for routine service:
- ARO 637396-VV repair kit
- ARO 96105-1 fluid cap
- ARO 66073-2 airline kit
- ARO 67237 diaphragm failure detection
- ARO 96104-1 air cap
- ARO Y240-9 U-cup packing
The model's parts list contains 58 items altogether.
| Brand | ARO |
|---|---|
| Product Type | Pump |
| Product Series | EXP Series |
| Material - Diaphragm | Viton |
| Application | Air Operated Pump |
| Outlet Size | 1 in |
| Solids Handling | 1/8 in |
| Material - Balls | Viton |
| Material - Seats | Polypropylene |
| Max Air Inlet Pressure | 120 psi (8.3 bar) |
| Max Flow | 53.0 gpm (200.6 lpm) |
| Max Fluid Pressure | 120 psi (8.3 bar) |
| Noise Level | 79.7 dB(A) |
| Material - Hardware | Stainless Steel |
| Notes | AODD Pump, Non-Metallic, Expert Series, 1" ANSI/DIN Hybrid Side Flange Connections, PP Center Section, PP Wetted Parts, SS Hardware, PP Seat, Viton Ball, Viton Diaphragm |
| Displacement | Positive Displacement |
ARO 96229 Flange Nut is an ARO part or accessory, identified by SKU 96229. Review specifications and model compatibility before ordering.
Replace or service compatible ARO Expert Series diaphragm pump assemblies with the 96229 M8 x 1.25 stainless steel flange nut.
The ARO 95845 is a Santoprene check-valve diaphragm for the air section of compatible ARO PM15X diaphragm pumps. Verify the complete pump model before ordering.
