ARO PD10P-YKS-KAA 1 In PVDF Diaphragm Pump, Center Flange
PVDF-wetted 1 in EXP AODD pump, ANSI/DIN hybrid center flanges, Santoprene diaphragms and balls.
PVDF wetted parts and PVDF seats set this 1 in EXP pump apart. It has ANSI/DIN hybrid center flanges and Santoprene diaphragms and balls.
Instead of polypropylene, the ARO PD10P-YKS-KAA routes fluid through PVDF wetted parts and PVDF seats. The center section remains polypropylene. Connections are 1 in ANSI/DIN hybrid center flanges. Santoprene diaphragms and Santoprene balls complete the fluid end, and the hardware is stainless steel.
Performance matches the rest of the 1 in EXP range: 53.0 gpm (200.6 lpm) peak flow, 120 psi (8.3 bar) maximum air, and 1/8 in solids passage. An Engineering Data sheet is included with the documents for this model.
PVDF is a fluoropolymer that buyers often select when polypropylene is not compatible with the fluid. Center flange ports bring suction and discharge out on the pump's centerline. Before ordering, look up both PVDF and Santoprene for your fluid in the Chemical Resistance Guide, and use the Engineering Data sheet to plan the installation.
Core Specs
- Wetted parts and seats: PVDF
- Center section: polypropylene
- Ports: 1 in ANSI/DIN hybrid center flange
- Diaphragms and balls: Santoprene
- Maximum fluid pressure: 120 psi (8.3 bar)
Good Matches
- Fluids that need PVDF in the wetted path rather than polypropylene
- Flanged piping laid out to ANSI or DIN standards
- Process chemical transfer once compatibility is confirmed
- Tank farms and chemical rooms run on plant air
Service Items for the KAA
This model's parts list calls for the 96105-2 fluid cap.
- ARO 96105-2 fluid cap
- ARO 637396-AA EXP service kit
- ARO 67237 diaphragm failure detection kit
- ARO 66073-2 airline kit
- ARO Y240-9 packing U-cup
- ARO 95844 gasket
See the parts list for all 58 components. The service kit, DFD kit and fluid cap above are sensible items for a spares shelf.
| Brand | ARO |
|---|---|
| Product Type | Pump |
| Product Series | EXP Series |
| Material - Diaphragm | Santoprene |
| Application | Air Operated Pump |
| Outlet Size | 1 in |
| Solids Handling | 1/8 in |
| Material - Balls | Santoprene |
| Material - Seats | PVDF |
| Max Air Inlet Pressure | 120 psi (8.3 bar) |
| Max Flow | 53.0 gpm (200.6 lpm) |
| Max Fluid Pressure | 120 psi (8.3 bar) |
| Noise Level | 79.7 dB(A) |
| Material - Hardware | Stainless Steel |
| Notes | AODD Pump, Non-Metallic, Expert Series, 1" ANSI/DIN Hybrid Center Flange Connections, PP Center Section, PVDF Wetted Parts, SS Hardware, PVDF Seat, Santoprene Ball, Santoprene Diaphragm |
| Displacement | Positive Displacement |
ARO 96229 Flange Nut is an ARO part or accessory, identified by SKU 96229. Review specifications and model compatibility before ordering.
Replace or service compatible ARO Expert Series diaphragm pump assemblies with the 96229 M8 x 1.25 stainless steel flange nut.
The ARO 95845 is a Santoprene check-valve diaphragm for the air section of compatible ARO PM15X diaphragm pumps. Verify the complete pump model before ordering.
