ARO PD10P-YKS-KTT 1-Inch Diaphragm Pump, PVDF Seats, PTFE
1" EXP Series AODD pump with PVDF seats, PTFE balls and PTFE/Santoprene diaphragms; stainless hardware.
1-inch ARO EXP pump pairing PVDF seats with PTFE balls and PTFE/Santoprene diaphragms. Flow is rated to 53.0 gpm (200.6 lpm).
The ARO PD10P-YKS-KTT belongs to the 1" Expert (EXP) Series of air-operated double diaphragm pumps. Its check valves combine PVDF seats with PTFE (Teflon) balls, and its diaphragms are a PTFE/Santoprene construction. Stainless steel hardware is specified.
The product data lists a 1 in outlet, a top flow of 53.0 gpm (200.6 lpm), 120 psi (8.3 bar) as the limit for both air inlet and fluid pressure, solids passage of 1/8 in and a noise figure of 79.7 dB(A). The connection style is not given in our data, so check the model number code document or the pump nameplate before ordering fittings.
The YKS-KTT shares its seat, ball and diaphragm materials with the PD10P-FKS-KTT, and our spec table shows the same performance for both. The difference lies in the first group of the model code, so compare the code chart with your piping before choosing between them.
Key Specifications
- Seats: PVDF
- Balls: Teflon/PTFE
- Diaphragms: PTFE/Santoprene
- Hardware: stainless steel
- Pressure limit: 120 psi (8.3 bar)
- Solids passage: 1/8 in
Typical Applications
- Chemicals that need fluoropolymer seats and balls
- Transfer of thin liquids with only fine solids present
- Duties confirmed against the ARO Chemical Resistance Guide
- Closed transfer loops where the fluid stays reasonably clean
Service Parts for This Pump
From the PD10P-YKS-KTT parts list:
- ARO 637396-TT kit for EXP service
- ARO 96105-2 fluid cap
- ARO 96104-3 air cap
- ARO 67237 detection kit for a failed diaphragm
- ARO Y240-9 packing
- ARO 95879 hex flange nut
A total of 58 parts and kits are assigned to this pump.
| Brand | ARO |
|---|---|
| Product Type | Pump |
| Product Series | EXP Series |
| Material - Diaphragm | PTFE/Santoprene |
| Application | Air Operated Pump |
| Outlet Size | 1 in |
| Solids Handling | 1/8 in |
| Material - Balls | Teflon/PTFE |
| Material - Seats | PVDF |
| Max Air Inlet Pressure | 120 psi (8.3 bar) |
| Max Flow | 53.0 gpm (200.6 lpm) |
| Max Fluid Pressure | 120 psi (8.3 bar) |
| Noise Level | 79.7 dB(A) |
| Material - Hardware | Stainless Steel |
| Displacement | Positive Displacement |
ARO 96229 Flange Nut is an ARO part or accessory, identified by SKU 96229. Review specifications and model compatibility before ordering.
Replace or service compatible ARO Expert Series diaphragm pump assemblies with the 96229 M8 x 1.25 stainless steel flange nut.
The ARO 95845 is a Santoprene check-valve diaphragm for the air section of compatible ARO PM15X diaphragm pumps. Verify the complete pump model before ordering.
