ARO PD10P-YPS-PAA 1 In EXP Diaphragm Pump, Santoprene
1 in EXP Series air-operated pump with Santoprene diaphragms and balls seated on polypropylene.
Air-operated EXP pump with a 1 in outlet, Santoprene diaphragms and balls, and polypropylene seats. Moves up to 53.0 gpm (200.6 lpm).
The ARO PD10P-YPS-PAA belongs to the 1 in EXP Series of air-operated double diaphragm pumps. Santoprene is the elastomer throughout the fluid end, covering both diaphragms and balls. The balls check against polypropylene seats, and stainless steel hardware secures the pump.
On the performance side, it reaches 53.0 gpm (200.6 lpm) and tolerates 1/8 in solids. Air supply and fluid discharge are each limited to 120 psi (8.3 bar). The connection type is not stated in our data, so check the model number code document before you plan the piping.
An air-operated diaphragm pump uses two chambers that alternate. As air drives one diaphragm outward to discharge, the opposite diaphragm draws fluid in. Santoprene balls lift off the polypropylene seats to admit fluid and drop back to stop backflow. The cycle has no rotating shaft seal in contact with the fluid, and output can be tuned by adjusting the air supply.
Specification Summary
- Outlet: 1 in
- Santoprene diaphragms and balls
- Polypropylene seats
- Stainless steel hardware
- Capacity: 53.0 gpm (200.6 lpm)
- Noise rating: 79.7 dB(A)
Applications
- Everyday transfer of mild fluids that Santoprene tolerates
- Sump and pit emptying where solids stay under 1/8 in
- Loading and unloading of containers in maintenance areas
- Utility pumping in plants that already run compressed air lines
Parts Used in the YPS-PAA
These items come from the pump's parts list.
- ARO 637396-AA service kit for EXP pumps
- ARO Y186-49 U-cup
- ARO 96293 spool for the air valve
- ARO 96104-1 air cap
- ARO 95842 gasket
A total of 58 parts make up the complete list. If you are unsure which kit applies, read the model code from the nameplate and compare it with the parts list.
| Brand | ARO |
|---|---|
| Product Type | Pump |
| Product Series | EXP Series |
| Material - Diaphragm | Santoprene |
| Application | Air Operated Pump |
| Outlet Size | 1 in |
| Solids Handling | 1/8 in |
| Material - Balls | Santoprene |
| Material - Seats | Polypropylene |
| Max Air Inlet Pressure | 120 psi (8.3 bar) |
| Max Flow | 53.0 gpm (200.6 lpm) |
| Max Fluid Pressure | 120 psi (8.3 bar) |
| Noise Level | 79.7 dB(A) |
| Material - Hardware | Stainless Steel |
| Displacement | Positive Displacement |
ARO 96229 Flange Nut is an ARO part or accessory, identified by SKU 96229. Review specifications and model compatibility before ordering.
Replace or service compatible ARO Expert Series diaphragm pump assemblies with the 96229 M8 x 1.25 stainless steel flange nut.
The ARO 95845 is a Santoprene check-valve diaphragm for the air section of compatible ARO PM15X diaphragm pumps. Verify the complete pump model before ordering.
