ARO PD10P-YPS-PTA 1 In EXP Diaphragm Pump, PTFE Balls, PP Seats
Non-metallic 1 in EXP AODD pump: PTFE balls, polypropylene seats and Santoprene diaphragms.
Non-metallic 1 in EXP pump fitted with PTFE balls, polypropylene seats and Santoprene diaphragms, with stainless steel hardware.
In the ARO PD10P-YPS-PTA, PTFE check balls handle the valve work while Santoprene diaphragms move the fluid. The seats are polypropylene. This non-metallic pump has a 1 in outlet and belongs to the EXP Series, with stainless steel hardware.
Peak capacity is 53.0 gpm (200.6 lpm). Both inlet air and fluid output top out at 120 psi (8.3 bar). Our data does not list the port style, so confirm it on the model number code chart or the pump nameplate.
PTFE balls are hard and resist swelling in many chemicals, so they tend to hold their shape. The Santoprene diaphragm is the part that flexes, which makes it a regular wear item. A diaphragm failure detection kit can warn operators of a rupture before fluid reaches the air side. Match any kit to this exact model code using the parts list.
Spec Sheet Highlights
- Check balls: Teflon/PTFE
- Seats: polypropylene
- Diaphragms: Santoprene
- 1 in outlet, solids to 1/8 in
- Sound pressure: 79.7 dB(A)
Use Cases
- Fluids where a PTFE ball is wanted in the check valves
- Chemical transfer that suits a polypropylene seat
- Container filling and emptying at up to 53 gpm
- Plants needing a non-metallic pump body with stainless hardware
Repair Kits and Parts
Below are selected items from the YPS-PTA bill of materials.
- ARO 637396-TA service kit
- ARO 67237 diaphragm failure detection
- ARO Y240-9 U-cup packing, black
- ARO 95842 gasket
- ARO 96104-3 air cap
- ARO 96105-1 fluid cap
You will find 58 parts in the complete list for this pump. Order gaskets along with the service kit so a single teardown covers both.
| Brand | ARO |
|---|---|
| Product Type | Pump |
| Product Series | EXP Series |
| Material - Diaphragm | Santoprene |
| Application | Air Operated Pump |
| Outlet Size | 1 in |
| Solids Handling | 1/8 in |
| Material - Balls | Teflon/PTFE |
| Material - Seats | Polypropylene |
| Max Air Inlet Pressure | 120 psi (8.3 bar) |
| Max Flow | 53.0 gpm (200.6 lpm) |
| Max Fluid Pressure | 120 psi (8.3 bar) |
| Noise Level | 79.7 dB(A) |
| Material - Hardware | Stainless Steel |
| Notes | 1" Exp Non Metallic Diaphragm Pump |
| Displacement | Positive Displacement |
ARO 96229 Flange Nut is an ARO part or accessory, identified by SKU 96229. Review specifications and model compatibility before ordering.
Replace or service compatible ARO Expert Series diaphragm pump assemblies with the 96229 M8 x 1.25 stainless steel flange nut.
The ARO 95845 is a Santoprene check-valve diaphragm for the air section of compatible ARO PM15X diaphragm pumps. Verify the complete pump model before ordering.
